/* chartstr.h */

#ifndef _INC_CHARTSTR_H
#define _INC_CHARTSTR_H

#if      _sys_is_locale_fname(__INCLUDENAME__)
#include <{_sys_locale_fname(__INCLUDENAME__)}>
#else


#define _chtstr_cht    "Chart Properties for W%d"
#define _chtstr_axe    "Axis"
#define _chtstr_axe2   "Axis Attributes for W%d"

#define _chtstr_grd    "Grids"
#define _chtstr_dat    "Data Settings"
#define _chtstr_lab    "Labels"
#define _chtstr_grp    "Graphical Settings"
#define _chtstr_wnd    "Window"
#define _chtstr_tab    "Table"

// axis.pan
#define _chtstr_crd    "Coords"
#define _chtstr_tic    "Tics"
#define _chtstr_scl    "Scales"

#define _chtstr_xsc    "X Scale"
#define _chttip_xsc    "Standard Linear Scales | Logarithmic Scales"
#define _chtstr_lxs    "Label X Subtics"
#define _chttip_lxs    "Label Individual X Subtic Intervals"
#define _chtstr_tnl    "Use 10^n Labels"
#define _chttip_tnl    "Labels in Exponential Power Form"
#define _chtstr_ysc    "Y Scale"
#define _chttip_ysc    "Standard Linear Scales | Logarithmic Scales"
#define _chtstr_lys    "Label Y Subtics"
#define _chttip_lys    "Label Individual Y Subtic Intervals"

#define _chtopt_lnr    "Linear"
#define _chtopt_log    "Log"

#define _chtstr_lxc    "Left X Coord"
#define _chtstr_rxc    "Right X Coord"
#define _chtstr_pxs    "% of X Span"
#define _chttip_pxs    "Percentage of Full X Axis Occupied by this Scale"

#define _chtstr_tyc    "Top Y Coord"
#define _chtstr_byc    "Bottom Y Coord"
#define _chtstr_pys    "% of Y Span"
#define _chttip_pys    "Percentage of Full Y Axis Occupied by this Scale"

#define _chtstr_tzc    "Top Z Coord"
#define _chtstr_bzc    "Bottom Z Coord"

#define _chtstr_xti    "X Tic Interval"
#define _chttip_xti    "Spacing Between X Tics"
#define _chtstr_yti    "Y Tic Interval"
#define _chttip_yti    "Spacing Between Y Tics"
#define _chtstr_zti    "Z Tic Interval"
#define _chttip_zti    "Spacing Between Z Tics"

#define _chtstr_xtf    "Tic First X"
#define _chttip_xtf    "Always Place Tic at First X Value"
#define _chtstr_xtx    "Fix X Tics"
#define _chttip_xtx    "X Tic Locations Remained Fixed"

#define _chtstr_ytf    "Tic First Y"
#define _chttip_ytf    "Always Place Tic at First Y Value"
#define _chtstr_ytx    "Fix Y Tics"
#define _chttip_ytx    "Y Tic Locations Remained Fixed"

#define _chtstr_xrt    "X Rotation"
#define _chtstr_yrt    "Y Rotation"
#define _chtstr_zrt    "Z Rotation"

#define _chtstr_slc    "Scales Location"
#define _chtstr_pas    "Preserve Axis Settings"
#define _chttip_pas    "Set Axes to Not Automatically Resize on New Data"
#define _chtstr_asc    "Autoscale"
#define _chttip_asc    "Automatically Adjust Current Axes Settings"
#define _chtstr_asr    "Set Autoscale"
#define _chttip_asr    "Set Autoscale Range"

#define _chtstr_sco    "Stripchart Options"


// grids.pan
#define _chtstr_grd2   "Grid Attributes for W%d"

#define _chtstr_xgs    "X Grid Style"
#define _chtstr_ygs    "Y Grid Style"
#define _chtstr_gcl    "Grid Color"

#define _chtopt_off    "Off"
#define _chtopt_sol    "Solid"
#define _chtopt_dsh    "Dashed"
#define _chtopt_dot    "Dotted"
#define _chtopt_ddt    "Dash Dot"
#define _chtopt_ddd    "Dash Dot Dot"

#define _chtgrd_w      (-1)


// serdata.pan
#define _chtstr_dat2   "Data Settings for W%d"
#define _chtstr_dse    "Data Series"
#define _chtstr_xip    "X Interval Properties"
#define _chtstr_unt    "Units"
#define _chtstr_vun    "Vertical Units (Y)"
#define _chtstr_hun    "Horizontal Units (X)"
#define _chtstr_zun    "Height Units (Z)"

#define _chtstr_xdx    "X Delta"
#define _chtstr_xof    "X Offset"
#define _chtstr_yip    "Y Interval Properties"
#define _chtstr_ydx    "Y Delta"
#define _chtstr_yof    "Y Offset"

#define _chtstr_all    "All Traces"
#define _chttip_all    "Set Value for All Traces"


// label.pan
#define _chtstr_lab2   "Window Labels for W%d"
#define _chtstr_wlb    "Window Label"
#define _chtstr_clr    "Clear"
#define _chttip_clr    "Clear Window Label and Set to Formula"
#define _chttip_xclr   "Clear X Label and Set to X Units"
#define _chttip_yclr   "Clear Y Label and Set to Y Units"
#define _chttip_zclr   "Clear Z Label and Set to Z Units"
#define _chtstr_vlb    "Vertical Label (Y)"
#define _chtstr_hlb    "Horizontal Label (X)"
#define _chtstr_zlb    "Height Label (Z)"
#define _chtstr_pzl    "Preserve Height Label (Z)"
#define _chttip_pzl    "Preserve Z Label During Window Recalculation"
#define _chtstr_pvl    "Preserve Vertical Label (Y)"
#define _chttip_pvl    "Preserve Y Label During Window Recalculation"
#define _chtstr_phl    "Preserve Horizontal Label (X)"
#define _chttip_phl    "Preserve X Label During Window Recalculation"

#define _chtstr_pwl    "Preserve Window Label"
#define _chttip_pwl    "Preserve Window Label When Entering a New Formula"

#define _chtstr_lcl    "Axes Label Colors "
#define _chttip_lcl    "Set Axes Label Colors"

#define _chtstr_fal    "Axes Label Font"
#define _chttip_fal    "Set Axes Label Font Properties"
#define _chtstr_ftv    "Tic Font"
#define _chttip_ftv    "Set Tic Value Font Properties"


// serctrl.pan
#define _chtstr_grp2   "Graphical Settings for W%d"

#define _chtstr_sty    "Series Style"
#define _chtstr_ccl    "Curve Color"
#define _chtstr_pst    "Plot Style"

#define _chtstr_lst    "'Line Style:   '"
#define _chtstr_lwd    "'Line Width: '"

#define _chtstr_sym    "Symbols"
#define _chtstr_syt    "Symbol Type"
#define _chtstr_snv    "Show Numeric Values"
#define _chtstr_sse    "Symbol Spacing Every"
#define _chtstr_sap    "First Symbol at Point"
#define _chtstr_ssz    "Symbol Size"
#define _chtstr_dsz    "Default Symbol Size"

#define _chtstr_msc    "Misc"
#define _chtstr_cbv    "Center Bars on Values"
#define _chtstr_ebb    "Extend Bars to Bottom"
#define _chtstr_sgb    "Show Gaps Between Bars"
#define _chtstr_csv    "Center Steps on Values"
#define _chtstr_oab    "Draw Outline Around Bars"

#define _chtopt_lin    "Lines"
#define _chtopt_pts    "Points"
#define _chtopt_stc    "Sticks"
#define _chtopt_bar    "Bars"
#define _chtopt_tab    "Table View"
#define _chtopt_stp    "Steps"
#define _chtopt_stm    "Stem"

#define _chtopt_non    "None"

//#define _chtopt_sqr    "Square"
#define _chtopt_sqr    "■"

//#define _chtopt_tri    "Triangle"
#define _chtopt_tri    "▲"

//#define _chtopt_itr    "Inverted Triangle"
#define _chtopt_itr    "▼"

//#define _chtopt_crs    "Cross"
#define _chtopt_crs    "🞣"

//#define _chtopt_xcr    "Xcross"
#define _chtopt_xcr    "🞪"

//#define _chtopt_cua    "Clear Up Arrow"
#define _chtopt_cua    "⇧"

//#define _chtopt_cda    "Clear Down Arrow"
#define _chtopt_cda    "⇩"

//#define _chtopt_uar    "Up Arrow"
#define _chtopt_uar    "🡅"

//#define _chtopt_dar    "Down Arrow"
#define _chtopt_dar    "🡇"

//#define _chtopt_cdm    "Clear Diamond"
#define _chtopt_cdm    "◇"

//#define _chtopt_csq    "Clear Square"
#define _chtopt_csq    "🞎"

//#define _chtopt_ctr    "Clear Triangle"
#define _chtopt_ctr    "△"

//#define _chtopt_cit    "Clear Inverted Triangle"
#define _chtopt_cit    "▽"

//#define _chtopt_cir    "Circle"
#define _chtopt_cir    "⬤"

//#define _chtopt_ccr    "Clear Circle"
#define _chtopt_ccr    "○"

//#define _chtopt_dmd    "Diamond"
#define _chtopt_dmd    "◆"



// ser3dctl.pan
#define _chtstr_shd    "Shading"
#define _chtstr_pty    "Plot Type"
#define _chtstr_sch    "Show Cross Hatching"
#define _chtstr_clv    "Contour Levels"
#define _chtstr_scs    "Show Contour Shading"
#define _chtstr_cls    "Color Shading"
#define _chtstr_lcr    "Limit Color Range"
#define _chtstr_smn    "Color Shading Minimum"
#define _chtstr_smx    "Color Shading Maximum"
#define _chtstr_chc    "Cross Hatch Color"
#define _chtstr_chi    "Cross Hatch Interval"
#define _chtstr_chx    "X Hatch"
#define _chtstr_chy    "Y Hatch"


// wincolor.tab
#define _chtstr_wcw    "Window Colors for W%d"


// wincolor.pan
#define _chtstr_dcw    "Default Colors for W%d"


// winatts.pan
#define _chtstr_wnd2   "Window Attributes for W%d"
#define _chtstr_col    "Colors"
#define _chtstr_wcl    "Window Color"
#define _chtstr_dsc    "Default Series Color"
#define _chtstr_dgc    "Default Grid Color"
#define _chtstr_dtc    "Default Tic Color"
#define _chtstr_par    "Plot Aspect Ratio"

#define _chttip_par    "Maximize Plot Area | Keep Plot Area Square | Scale to Image Size"
#define _chtopt_asq    "Square"
#define _chtopt_ant    "Natural"

#define _chtstr_opc    "OnPlotCalc"
#define _chttip_opc    "Do Not Recalculate Dependent Windows on Plotting | Recalculate Dependent Windows on Plotting"

#define _chtstr_lkw   "Lock Window"
#define _chttip_lkw   "Do Not Lock Window Formula | Lock Window Formula"

#define _chtstr_nam    "Name"
#define _chtstr_wna    "Symbolic Name"
#define _chttip_wna    "Symbolic Name for Window, 15 Characters, Cannot Not Contain Spaces"
#define _chtstr_dna    "Use Window Number"
#define _chttip_dna    "Use Normal 'W1' Window Name"
#define _chtstr_ssn    "Show Symbolic Names"
#define _chttip_ssn    "Show Symbolic Names for All Windows"


// tblconf.pan
#define _chtstr_jtv    "Justify Table Values"
#define _chttip_jvt    "Left Justify Table Values | Center Table Values | Right Justify Table Values"
#define _chtopt_lft    "Left"
#define _chtopt_cen    "Center"
#define _chtopt_rht    "Right"

#define _chtstr_jch    "Justify Column Header"
#define _chttip_jch    "Left Justify Table Column Header | Center Table Column Header | Right Justify Table Column Header"

#define _chtstr_tds    "Table Display Style"
#define _chttip_tds    "Table with No Borders | Table with 3D Row and Column Borders"
#define _chtopt_smp    "Simple"
#define _chtopt_sss    "Spreadsheet Style"

#define _chtstr_tch    "Table Column Header Text"

#define _chtstr_cln    "Column Number"
#define _chttip_cln    "Add Column Number to First Header Line | Make Column Number the First Header Line"
#define _chtopt_cmb    "Combine"
#define _chtopt_sph    "Separate Header"

#define _chtstr_rwn    "Show Row Numbers"
#define _chttip_rwn    "Display All Row Numbers"

#define _chtstr_pna    "Show NaN Values as Blanks"
#define _chttip_pna    "Display NaN Values as Blank Lines"

#define _chtstr_pif    "Show INF Values as Blanks"
#define _chttip_pif    "Display INF Values as Blank Lines"

#define _chtstr_hdn    "Header Name"
#define _chttip_hdn    "Do Not Display Series Name | Display Series Name | Display Dataset and Series Name"
#define _chtopt_srn    "Series Name"
#define _chtopt_fln    "Full Name"

#define _chtstr_hdi    "Header Info"
#define _chttip_hdi    "Do Not Display Units or Comment | Display Units or Display Comment if Not Default Comment | Display Units Only | Display Comment Only | Display Both Units and Comment"
#define _chtopt_uoc    "Units or Comment"
#define _chtopt_unt    "Units"
#define _chtopt_cmt    "Comment"
#define _chtopt_uac    "Units and Comment"

#define _chtstr_hdu    "Use Labels"
#define _chttip_hdu    "Substitute X, Y, or Z Labels for Header Info Unit Display"

// axisfoc.pan
#define _chtstr_ovf    "Overlay Focus"
#define _chtstr_sax    "Sync Axis"
#define _chtopt_ind    "Independent"
#define _chtopt_x      "X"
#define _chtopt_y      "Y"
#define _chtopt_xy     "XY"
#define _chtopt_xe     "X Expand"
#define _chtopt_ye     "Y Expand"
#define _chtopt_xye    "XY Expand"


// winclr.pan
#define _chtstr_xsy    "Align X Axis"
#define _chttip_xsy    "Align All X Axes with Respect to Root X Axis"

#endif
#endif